Lokpal Industries

High Pressure Cold Water Washer is intended for industrial use.

• Low water discharge
• High pressure Surface Cleaning
• Drain cleaning
• Tank cleaning
• Sand blasting
• Building washing
• Car washing
• Heavy voiceles washing
• Misting Application
• Reciprocating Pumps
• Triplex Plunger
• Industrial grade
• Continues Duties
• Brass Unloader valve with by-pass

Single PC Barrow.
Big Pneumatic wheel.
Powdered coated.
Light Weight.

• Light weight, with great strength.
• Used in many applications as per your requirements.

Motor / Nozzle / Vibrator is intended for industrial use.

Motor / Nozzle / Vibrator is intended for use in construction sites.

Pressure washing or power washing is the use of high-pressure water spray to remove loose paint, mold, grime, dust, mud, chewing gum and dirt from surfaces and objects such as buildings, vehicles and concrete surfaces. The volume of a mechanical pressure washer is expressed in gallons or liters per minute, often designed into the pump and not variable.The pressure, expressed in pounds per square inch, pascals, or bar, is designed into the pump but can be varied by adjusting the unloader valve.Get best price of Electric Pressure Washer.

• Low water discharge
• High pressure Surface Cleaning
• Drain cleaning
• Tank cleaning
• Sand blasting
• Building washing
• Car washing
• Reciprocating Pumps
• Triplex Plunger
• Continues Duties
• Brass Unloader valve with by-pass

Sludge Pump is intended for the following:

• Rainwater drainage

• Basement/ Accumulated water drainage

• Suitable for light duty application
• Draining of sewers.
• Higher Solid Size Transfer rate, Fiber transfer rate, Self-Priming
• Remove slurry from car wash bay/chemical spills

Sludge Sucker uses a high pressure water stream (1000-4000 PSI) to suck the sludge off the bottom of pits or tanks and eject it through a 1-1/2" (15 FT. long) hose to a disposal tank.

The Sludge Pump is a great tool for cleaning up water and slurries. Simply attach the pressure line from a portable power washer or car wash bay. The water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions. Debris as large as 3/4" will pass through the casting and out the discharge hose.

The base unit attaches to the end of a pressure washer lance with a 1/4 inch quick coupler for extension to the bottom of the pit. Uses a 0 tip for suction/power ejection. Base unit measures 6" long and 4" wide.

• Min/max water flow: 36 PM - 86 PM
• Min/max pressure: 1000 PSI - 4000 PSI
• Uses standard 1/4" MPT nozzle
• Easy to change for different plumbing system flows and pressures.
• 4.5 orifice MEG Spray Nozzle
• Vacuums up liquid slurries at a ratio of about 1:11 (Example: using 4 GPM will produce an output of 44 GPM
• High pressure creates more lift (Example: 1000 psi will lift water 10 feet while the max. 4000 psi will lift it 30 feet.)
• Cleans up solutions/slurries without damage to your pressure pump.

Adjustable and Steerable Skates

All maximum carrying capacities are based for use on a steel surface which can withstand the pressure of the skate rollers. The load bearing capacity of the floor is as important as the capacity of the skates.

The load should be supported on the skates in such a way that all skates on which the load rests are subjected to equal load.

Movement on concrete floors is restricted and a steel plate of a minimum thickness of 12mm or as required should be placed on the floor. Never use the skates on an incline plane.

Features :

• Light weight, with great strength.
• Used in many applications as per your requirements.

Cold Water High-Pressure Washer (3WZ-3600, 3WZ-4350)is intended for industrial use.

• Low water discharge
• High-pressure Surface Cleaning
• Drain cleaning
• Tank cleaning
• Sand blasting
• Building washing
• Car washing
• Reciprocating Pumps
• Triplex Plunger
• Industrial grade
• Continues Duties
• Brass Unloader valve with by-pass

Steam Cleaner is intended for industrial use.

Hot Air 3 Speed Blower (SC-2900) is intended for industrial use.

• Variable speed control.
• High load conditions to maintain rated speed.
• Professional long-term continuous polishing operation.
• Slim body design for human engineering.

Engine Operated Sweeper (BRAVA HT/ET) is intended for industrial use.

• Overthrow cleaning system to fill the waste container completely
• Heavy-duty steel chassis
• Floating side brush with the mechanical lift
• Twin mechanical shaker for dust filter cleaning
• Vacuum cut off for wet sweeping
• Foldable handle
• Steel front bumper
• Parking brake

Single Disc Floor Scrubber (SC-004-F) is intended for industrial use.

• Multipurpose single dis machine
• Cleaning and polishing any kind of floors
• Large capacity solution tank, scrubbing, polishing,
• buffing and carpet shampooing etc.
• High powerful induction motor
• Well balanced to centrally placed motor system
• Minimum noise levels
• The machine can be used on the concrete floor, epoxy floor, mosaic floor, wooden floor, marble, granite, carpets, vinyl floor
• Wax removal
• Diamond polishing
• Wooden floor maintenance
• Crystallization

Hulk Single Disc Floor Scrubber (SC-002-F)

Features:

• Powered by high quality Double stage all copper winding durable motor
• They have international CE certification for quality and performance
• They are long life and easy to maintain

Sofa - Carpet Cleaners is intended for industrial use.

• Multi-functional
• Combines foam producing
• Brushing in one
• Bubble brushing
• Mechanization cleaning
• Small and convenient size

Brand: Hulk
Auto Scrubber Drier (SC-461C) is intended for industrial use.

• Portable design, easy operation.
• Operation panel at a glance, easier to manipulate.
• It has a large water tank capacity.
• Mechanical parameters are displayed at any time, letting you be clear of the operational situation of the machine.

Single Disc Floor Scrubber is intended for industrial use.

• Multipurpose single dis machine
• Cleaning and polishing any kind of floors
• Large capacity solution tank, scrubbing, polishing,
• buffing and carpet shamppoing etc.
• High powerful indusction motor
• Well balanced to centrally placed motor system
• Minimum noise levels
• Machine can be used on concret floor, epoxy floor, mosaic floor, wooden flor, marble, grante, carpets, vinyal floor
• Wax removal
• Diamod polishing
• Wooden floor maintenance
• Crystalization

Ride-On Scrubber Drier (CT80 BT55) is intended for industrial use.

• Solution distribution from brush center.
• Constant weight.
• Auto adjustable weight system.
• Brush replacement without tools.
• Squeegee blade can be used on 4 sides before replacement.
• Antifoam system.
• Scrubber Driers can be used on the concrete floor, mosaic floor etc.

Brand: Hulk

Model: COMFORT XXS66

Ride-On Scrubber Drier is intended for industrial use.

• Solution distribution from brush center.
• Equal Pressure applied our surface.
• Auto adjustable weight system.
• Brush replacement without tools.
• Squeegee blade can be used on 4 sides before replacement.
• Antifoam system.
• Scrubber Driers can be used on the concrete floor, mosaic floor etc.