Lokpal Industries

Portable Hoister is Convenient Light weight 3 piece design can be easily dismantled and carried from floor to floor.

• For use in small construction sites.
• Easy to move floor to floor.
• Very Portable and light weight.

Lifts is intended for use at different construction site.

A large number of commercial high-rise buildings in India now have external glass curtain walls. Such buildings require constant maintenance, This is highly dangerous work which should be carried out by cleaners using Suspended Cradle System with a Cradle suspended f rom the roof whi ch replaces conventional scaffoldings. The system can be used for external brickwork, plastering, painting, finishing etc.

Lokpal industries offers such sophisticated systems consisting of an electrically operated Hoisting machine incorporating a ‘a’ cable guidance system and Anti Inclination safety locks as well as Speed Limit safety locks. These are available upto 800kg capacity. These Cradle systems are easy to install on the roof of the building. The height of the suspension Jib, as well as the projecting length (front beam) is adjustable so the system can easily adapt to different Facades and Fascia's as well as roof structures. Special systems can be designed to suit the users non standard requirements.

Monkey Lift is intended for industrial use.

Mini Lift is Convenient Light weight 4 piece design can be easily dismantled and carried from floor to floor.

Rebar Thread Rolling Machine is intended for industrial use.

• HGS-40 rib peeling and thread rolling machine is compact in structure, stable in operation, and has an automatic opening and closing mechanism for rib peeling. Cycle time is only 30 seconds to finish a threaded end.
• Adopts cold thread rolling technology. does not cut the rebar parent metal, the strength of Rolled Thread is much higher than the parent metal.
• Widely used, is able to process rebar of grades II and III with diameters 16mm- 40mm.
• Easy to operate, no skilled technicians required.
• Economic, low investment for the equipment.
• Threading saves at least 20% wastage of expensive Rebars compared to the conventional Splicing lap procedure.

Building Hoist is intended for industrial use.

Bar Bender is intended for industrial use.

• Rebar bending machine is an ideal rebar bending equipment. It has reasonable design, simple structure and can bend steel rods to any required shape.
• Steel Bar Bender is used for bending all kinds of A3 steel bar and grade II deformed steel bar, it can finish any shape of bending for construction work.
• Rebar fabrication is a time-consuming and complex process. High quality tools used by fabricators who are involved in construction project helps accelerate the project Lokpal Industries reduce the amount of waste.
• The dual angle adjustment device: simultaneously bends in 2 different angles: saving work time
• The adoption of foot-switch guarantees safe operation of the machine

Mechanical Bar Splice (Coupler) are a parallel thread mechanical splicing system designed for the connection of concrete reinforcing bars from Ö12~Ö50. Mechanical couplers to splice reinforcing bar has been regarded as a means of reducing the use of long bars and reduce wastage of expensive rebar's due to Splice lapping of the ends in the conventional methods of joining rebar's. More recently, engineers and installers have recognized the benefits of using couplers to increase construction speed, improve productivity and simplify design details. There are numerous mechanical splicing systems available for use on rebar, many with elements of strength and/or operational compromise

• Couplers are designed and manufactured in compliance with ACI318, JGJ107, UBC 1997, BS8110, NF35-20-1, DIN1045, ISO/WD 15835 (Draft).
• Under Full-Tension the bar breaks during tensile tests, but Coupler the remains unbroken.
• Easy to operate and maintain, High production efficiency and fast installation, no need for skilled technicians.
• The splices can be produced in advance saving valuable construction time.
• Inexpensive to purchase, maintain and repair.
• Couplers and threaded bars are protected by plastic cover.
• Full traceability of material origin and production batch.

• No staggering of spliced bars required.
• Practical alternative to lap splicing.
• Solves bar congestion problems.
• Shortens construction cycle time.
• Reduces steel wastage

Power Trowel Cum Floater is intended for industrial use.

Steel Stub Bar Straightening Machine is intended for industrial use.

Plate compactor

A plate compactor uses a large steel plate to get rid of air pockets in various ground materials and provide tighter compaction. They work on rough and uneven ground, to flatten it and create a level grade. Commonly, this will be soil, sand, hardcore, gravel, asphalt and similar.

A compactor is a machine or mechanism used to reduce the size of material such as waste material or bio mass through compaction

Plate compactor machine achieves swift and effective soil compaction. This compactor is viable for various soil types and construction projects. It creates a densely packed foundation by minimizing air voids

Plate compactors are commonly used for smaller projects, such as driveways, walkways, and landscaping jobs. They are also ideal for compacting granular soils and gravel. Some models come equipped with a water tank that allows for wet compaction, making them suitable for asphalt projects as well

A plate compactor uses vibration to encourage the soil to condense whereas a rammer compacts the soil through hitting the ground with force. A plate compactor is easier to use, a rammer requires you to have significant strength and vigilance- it delivers blows to the ground right near your feet.

A soil compactor is a construction equipment that uses force to compress and densify soil to improve its stability and load-bearing capacity. It is commonly used in construction projects, such as road works and residential construction, to create a solid foundation for the structure being built.

LAB CONCRETE MIXER

 The Laboratory Concrete Mixer is used for preparing Mix Design of Concrete. It consists of a steel vessel of 55/ 110 Litres capacity, mounted on a frame. The vessel is rotated at 20-22 RPM with the help of a motor and a pulley arrangement.

 A concrete mixer is a machine used in construction to mix cement, water, and other materials such as sand, gravel, and sometimes additives, to make concrete.

 One of the main advantages of using a concrete mixer is that it can save time and money. With the machine, construction workers can effortlessly mix large amounts of concrete in a short amount of time, which means they can complete their tasks faster and more efficiently.

Concrete Lab Mixer

Motor / Nozzle / Vibrator is intended for industrial use.

Plate compactor

A plate compactor uses a large steel plate to get rid of air pockets in various ground materials and provide tighter compaction. They work on rough and uneven ground, to flatten it and create a level grade. Commonly, this will be soil, sand, hardcore, gravel, asphalt and similar.

A compactor is a machine or mechanism used to reduce the size of material such as waste material or bio mass through compaction

Plate compactor machine achieves swift and effective soil compaction. This compactor is viable for various soil types and construction projects. It creates a densely packed foundation by minimizing air voids

Plate compactors are commonly used for smaller projects, such as driveways, walkways, and landscaping jobs. They are also ideal for compacting granular soils and gravel. Some models come equipped with a water tank that allows for wet compaction, making them suitable for asphalt projects as well

A plate compactor uses vibration to encourage the soil to condense whereas a rammer compacts the soil through hitting the ground with force. A plate compactor is easier to use, a rammer requires you to have significant strength and vigilance- it delivers blows to the ground right near your feet.

A soil compactor is a construction equipment that uses force to compress and densify soil to improve its stability and load-bearing capacity. It is commonly used in construction projects, such as road works and residential construction, to create a solid foundation for the structure being built.

Plate Compactors is intended for industrial use.

• Whether you work with compactors every day or you just need one every now and then for your projects, Lokpal offers quality, long-lasting plate compactors at amazing prices. Our plate compactors work with all types of materials including asphalt, dirt and cement.

Programmable Steel Bar Straightening & Cutting Machine is intended for industrial use.

Bar Straightener is intended for industrial use.

Vibrating Impact Rammers is intended for industrial use.

• Special 4- stroke engine for the rammer.
• The guide handle built-in shock mount reduces hand-arm vibration.
• Handle kit for easy transportation.
• Special crank and rod system for increased durability.
• Double Cleaner System.
• Heavy-duty shock rubber absorbs kickbacks.
• High-density polyethylene fuel tank eliminates corrosion.
• Rack and pinion throttle lever.

Mechanical Bar Splice (Coupler) is a parallel thread mechanical splicing system designed for the connection of concrete reinforcing bars from Ö12~Ö50. Mechanical couplers to splice reinforcing bar has been regarded as a means of reducing the use of long bars and reduce wastage of expensive rebars due to Splice lapping of the ends in the conventional methods of joining rebars. More recently, engineers and installers have recognized the benefits of using couplers to increase construction speed, improve productivity and simplify design details. There are numerous mechanical splicing systems available for use on rebar, many with elements of strength and/or operational compromise

• Couplers are designed and manufactured in compliance with ACI318, JGJ107, UBC 1997, BS8110, NF35-20-1, DIN1045, ISO/WD 15835 (Draft).
• Under Full-Tension the bar breaks during tensile tests, but Coupler the remains unbroken.
• Easy to operate and maintain, High production efficiency and fast installation, no need for skilled technicians.
• The splices can be produced in advance saving valuable construction time.
• Inexpensive to purchase, maintain and repair.
• Couplers and threaded bars are protected by plastic cover.
• Full traceability of material origin and production batch.

• No staggering of spliced bars required.
• Practical alternative to lap splicing.
• Solves bar congestion problems.
• Shortens construction cycle time.
• Reduces steel wastage.

Concrete Cube Testing Machine is used in construction industries to test the quality of concrete. The compressive strength of concrete is determined by testing concrete cubes or cylinders using the CTM machine. The CTM machine can also be used to test the compressive strength of other materials such as bricks, rocks, and metals.

What is a concrete cube test? A concrete cube test involves taking a sample of freshly mixed concrete, letting it cure, then crushing it and measuring its compressive strength. Many concrete suppliers carry out this process at a certified test house, away from their facilities.

Motor / Nozzle / Vibrator is intended for use in construction sites.